http://www.rwsprosound.co.uk/ Professional audio equipment available from RWS Prosound en-gb Copyrights RWS Prosound www.rwsprosound.co.uk http://www.rwsprosound.co.uk/layout-images/prosoundlogosmall.jpg http://www.rwsprosound.co.uk/ http://www.rwsprosound.co.uk/p/shure-slx2sm86-handheld-condensor-transmitter.html The SM86 with the SLX2 transmitter features the SM86 cardioidPicks up most sound in front of the microphone and some from the sides. It is less susceptible to feedback in high volume environments.  The SLX2 Wireless Handheld Transmitter includes a timed backlit LCD display, frequencyThis is how many times a sound or radio wave oscillates in one second. This transmitter requires the SLX4 receiver to complete the system. All Shure wireless transmitter designs allow for interchangeable microphone heads. Transmitter Type: Handheld Dimensions: 243 mm x 51 mm Battery, endurance: 2 AA, >8 h Weight: 290 g Further technical specifications: Audio Input Level:  +2 dBV maximum at -10dB position,  -8 dBV maximum at 0dB position Gain Adjustment Range:  10dB RF Transmitter Output:  30 mW maximum (dependent on applicable country regulations) Dimensions (including SM58 cartridge):   254 mm x 51 mm dia. (10 x 2 in.) Weight:  290 grams (10.2 oz.) without batteries Housing:  Molded PC/ABS handle and battery cup Power Requirements:  2 “AA” size alkaline or rechargeable batteries Battery Life:  >8 hours (alkaline) Thu, 28 Apr 2011 12:39:45 GMT http://www.rwsprosound.co.uk/p/shure-slx2sm86-handheld-condensor-transmitter.html http://www.rwsprosound.co.uk/p/shure-slx2sm58-handheld-transmitter.html The SM58 with the SLX2 transmitter features the legendary SM58 cardioidPicks up most sound in front of the microphone and some from the sides. It is less susceptible to feedback in high volume environments. The SLX2 Wireless Handheld Transmitter includes a timed backlit LCD display, frequencyThis is how many times a sound or radio wave oscillates in one second. This transmitter requires the SLX4 receiver to complete the system.  All Shure wireless transmitter designs allow for interchangeable microphone heads Transmitter Type: Handheld Dimensions: 254 mm x 51 mm Battery, endurance: 2 AA, >8 h Weight: 290 g Further technical specifications: Audio Input Level:  +2 dBV maximum at -10dB position,  -8 dBV maximum at 0dB position Gain Adjustment Range:  10dB RF Transmitter Output:  30 mW maximum (dependent on applicable country regulations) Dimensions (including SM58 cartridge):   254 mm x 51 mm dia. (10 x 2 in.) Weight:  290 grams (10.2 oz.) without batteries Housing:  Molded PC/ABS handle and battery cup Power Requirements:  2 “AA” size alkaline or rechargeable batteries Battery Life:  >8 hours (alkaline) Thu, 28 Apr 2011 12:20:53 GMT http://www.rwsprosound.co.uk/p/shure-slx2sm58-handheld-transmitter.html http://www.rwsprosound.co.uk/p/shure-slx4-diversity-receiver.html The Shure SLX4 wireless receiver offers unprecedented simplicity with features including Automatic FrequencyThis is how many times a sound or radio wave oscillates in one second.Read moreGo to the glossary Selection and Automatic Transmitter Setup. With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box. Other features include a backlit LCD screen which provides group, channel and antenna information. A five segment audio meter lets you monitor the incoming audio signal from the transmitter. The SLX4 receiver is used as part of the SLX wireless series which includes various handheld, headset and lapel mic options. Further specs: Dimensions: 42 mm H x 197 mm W x 134 mm D Weight: 816 g Housing:  Galvanized steel Audio Output Level : XLR connector (into 600 Ω load): –13 dBV, 1/4 inch connector (into 3000 Ω load): –2 dBV Output ImpedanceThis describes how resistant an electrical circuit is to the flow of electricity passing through it.XLR connector: 200 Ω,  1/4 inch connector: 1kΩ SensitivityThis is how mich signal a microphone produces for a given amount of sound.-105 dBm for 12 dB SINAD, typical  Image Rejection:  >70 dB, typical Operating Range Under Typical Conditions: 100m (300 ft.)  Audio Frequency ResponseThis is the range of frequencies, from the lowest to the highest, that a mic can pick up. (+/– 2 dB):  Minimum: 45 Hz,  Maximum: 15 kHz Thu, 28 Apr 2011 12:15:12 GMT http://www.rwsprosound.co.uk/p/shure-slx4-diversity-receiver.html http://www.rwsprosound.co.uk/p/shure-pgx24ukbeta87a-handheld-condensor-radio-mic-system.html The Shure PGX Beta 87A wireless system offers excellent sound for bands and presenters alike. It comprises a PGX2 handheld transmitter with a Beta 87A microphone head and PGX4 diversityWireless “diversity” receivers feature two separate antennas for consistent signal reception. System technical specifications Compatible systems per frequencyThis is how many times a sound or radio wave oscillates in one second. band (up to): 8 Selectable frequencies: 90 Auto Setup Features: Scan/Sync Audio Reference Companding: Yes Included Antennas: Attached 1/4-wave Antenna Options: No Receiver Network Ability: No PC Control: No Rack Hardware: Optional (URT) Case: System Case Transmitter Display: Multi-color LED Receiver Display: Multi-color LED Battery, Endurance: 2AA, >8 h Environment: Small to medium stages Further Technical Specs PGX4 Receiver Dimensions 40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.) Weight 327 g (11.5 oz.) Housing ABS Audio Output Level (ref. +/– 33 kHz deviation with 1 kHz tone) XLR connector (into 600 Ω load): –19 dBV 1/4 inch connector (into 3000 Ω load): –5 dBV Output Impedance XLR connector: 200 Ω 1/4 inch connector: 1kΩ XLR output Impedance balanced Pin 1: Ground (cable shield) Pin 2: Audio Pin 3: No Audio Sensitivity –105 dBm for 12 dB SINAD, typical Image Rejection >70 dB, typical Power Requirements 12–18 Vdc at 150 mA, supplied by external power supply    PGX2 Handheld Transmitter Audio Input Level +2 dBV maximum at –10dB position –8 dBV maximum at 0dB position Gain Adjustment Range 10dB RF Transmitter Output 30 mW maximum (dependent on applicable country regulations) Dimensions including SM58 cartridge 254 mm x 51 mm dia. (10 x 2 in.) Weight 290 grams (10.2 oz.) without batteries Housing Molded PC/ABS handle and battery cup Power Requirements 2 “AA” size alkaline or rechargeable batteries Battery Life >8 hours (alkaline) Thu, 28 Apr 2011 11:30:44 GMT http://www.rwsprosound.co.uk/p/shure-pgx24ukbeta87a-handheld-condensor-radio-mic-system.html http://www.rwsprosound.co.uk/p/shure-pgx24uksm86-handheld-radio-mic-system.html The Shure PGX SM86 system offers superior wireless technology and automatic set-up features. The system comprises of a PGX2 Handheld transmitter with an SM86 microphone head and a PGX4 DiversityWireless “diversity” receivers feature two separate antennas for consistent signal reception. This wireless system is ideally suited for vocals and can be used by bands and presenters. System technical specifications Compatible systems per frequencyThis is how many times a sound or radio wave oscillates in one second. band (up to): 8 Selectable frequencies: 90 Auto Setup Features: Scan/Sync Audio Reference Companding: Yes Included Antennas: Attached 1/4-wave Antenna Options: No Receiver Network Ability: No PC Control: No Rack Hardware: Optional (URT) Case: System Case Transmitter Display: Multi-color LED Receiver Display: Multi-color LED Battery, Endurance: 2AA, >8 h Environment: Small to medium stages Further Technical Specs Working Range 100m (300 ft.) Note: actual range depends on RF signal absorption,reflection, and interference Audio Frequency Response +/– 2 dB Minimum: 45 Hz Maximum: 15 kHz (Overall system frequency depends on microphone element. Total Harmonic Distortion Ref. +/– 33 kHz deviation, 1 kHz tone 0.5%, typical Dynamic Range >100 dB A-weighted Operating Temperature Range –18°C (0°F) to +50°C (+122°F) Note: battery characteristics may limit this range Transmitter Audio Polarity Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.   PGX1 BodypackTransmitter  Audio Input Level –10 dBV maximum at "mic" gain position +10 dBV maximum at 0dB gain position +20 dBV maximum at –10dB gain position Gain Adjustment Range 30 dB Input Impedance 1 MΩ RF Transmitter Output 30 mW maximum (dependent on applicable country regulations) Dimensions 108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.) Weight 81 grams (3 oz.) without batteries Housing Molded polycarbonate case Power Requirements 2 “AA” size alkaline or rechargeable batteries Battery Life >8 hours (alkaline)   PGX2 Handheld Transmitter Audio Input Level +2 dBV maximum at –10dB position –8 dBV maximum at 0dB position Gain Adjustment Range 10dB RF Transmitter Output 30 mW maximum (dependent on applicable country regulations) Dimensions including SM58 cartridge 254 mm x 51 mm dia. (10 x 2 in.) Weight 290 grams (10.2 oz.) without batteries Housing Molded PC/ABS handle and battery cup Power Requirements 2 “AA” size alkaline or rechargeable batteries Battery Life >8 hours (alkaline)   PGX4 Receiver Dimensions 40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.)  Weight 327 g (11.5 oz.) Housing ABS Audio Output Level (ref. +/– 33 kHz deviation with 1 kHz tone) XLR connector (into 600 Ω load): –19 dBV 1/4 inch connector (into 3000 Ω load): –5 dBV Output Impedance XLR connector: 200 Ω 1/4 inch connector: 1kΩ XLR output Impedance balanced Pin 1: Ground (cable shield) Pin 2: Audio Pin 3: No Audio Sensitivity –105 dBm for 12 dB SINAD, typical Image Rejection >70 dB, typical Power Requirements 12–18 Vdc at 150 mA, supplied by external power supply Thu, 28 Apr 2011 11:25:01 GMT http://www.rwsprosound.co.uk/p/shure-pgx24uksm86-handheld-radio-mic-system.html http://www.rwsprosound.co.uk/p/shure-pgx24ukbeta58a-handheld-radio-mic-system.html The Shure PGX BETA 58 wireless system offers excellent sound for bands and presenters alike. It comprises a PGX2 handheld transmitter with a BETA58A microphone head and PGX4 diversityWireless “diversity” receivers feature two separate antennas for consistent signal reception.Read moreGo to the glossary receiver. System technical specifications Compatible systems per frequencyThis is how many times a sound or radio wave oscillates in one second. band (up to): 8 Selectable frequencies: 90 Auto Setup Features: Scan/Sync Audio Reference Companding: Yes Included Antennas: Attached 1/4-wave Antenna Options: No Receiver Network Ability: No PC Control: No Rack Hardware: Optional (URT) Case: System Case Transmitter Display: Multi-color LED Receiver Display: Multi-color LED Battery, Endurance: 2AA, >8 h Environment: Small to medium stages Further Technical Specs PGX4 Receiver  Dimensions 40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.) Weight 327 g (11.5 oz.) Housing ABS Audio Output Level (ref. +/– 33 kHz deviation with 1 kHz tone) XLR connector (into 600 Ω load): –19 dBV 1/4 inch connector (into 3000 Ω load): –5 dBV Output Impedance XLR connector: 200 Ω 1/4 inch connector: 1kΩ XLR output Impedance balanced Pin 1: Ground (cable shield) Pin 2: Audio Pin 3: No Audio Sensitivity –105 dBm for 12 dB SINAD, typical Image Rejection >70 dB, typical Power Requirements 12–18 Vdc at 150 mA, supplied by external power supply    PGX2 Handheld Transmitter  Audio Input Level +2 dBV maximum at –10dB position –8 dBV maximum at 0dB position Gain Adjustment Range 10dB RF Transmitter Output 30 mW maximum (dependent on applicable country regulations) Dimensions including SM58 cartridge 254 mm x 51 mm dia. (10 x 2 in.) Weight 290 grams (10.2 oz.) without batteries Housing Molded PC/ABS handle and battery cup Power Requirements 2 “AA” size alkaline or rechargeable batteries Battery Life >8 hours (alkaline) Thu, 28 Apr 2011 11:21:06 GMT http://www.rwsprosound.co.uk/p/shure-pgx24ukbeta58a-handheld-radio-mic-system.html http://www.rwsprosound.co.uk/p/shure-pgx24uksm58-handheld-radio-mic-system.html The Shure PGX SM58 system offers superior wireless technology, automatic set-up features and the legendary SM58 microphone. The system comprises of a PGX2/SM58 Handheld transmitter and a PGX4 DiversityWireless “diversity” receivers feature two separate antennas for consistent signal reception. It is ideally suited for vocals and can be used by bands and presenters. System technical specifications Compatible systems per frequencyThis is how many times a sound or radio wave oscillates in one second. band (up to): 8 Selectable frequencies: 90 Auto Setup Features: Scan/Sync Audio Reference Companding: Yes Included Antennas: Attached 1/4-wave Antenna Options: No Receiver Network Ability: No PC Control: No Rack Hardware: Optional (URT) Case: System Case Transmitter Display: Multi-color LED Receiver Display: Multi-color LED Battery, Endurance: 2AA, >8 h Environment: Small to medium stages Further Technical Specs PGX4 Receiver Dimensions 40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.) Weight 327 g (11.5 oz.) Housing ABS Audio Output Level (ref. +/– 33 kHz deviation with 1 kHz tone) XLR connector (into 600 Ω load): –19 dBV 1/4 inch connector (into 3000 Ω load): –5 dBV Output Impedance XLR connector: 200 Ω 1/4 inch connector: 1kΩ XLR output Impedance balanced Pin 1: Ground (cable shield) Pin 2: Audio Pin 3: No Audio Sensitivity –105 dBm for 12 dB SINAD, typical Image Rejection >70 dB, typical Power Requirements 12–18 Vdc at 150 mA, supplied by external power supply    PGX2 Handheld Transmitter  Audio Input Level +2 dBV maximum at –10dB position –8 dBV maximum at 0dB position Gain Adjustment Range 10dB RF Transmitter Output 30 mW maximum (dependent on applicable country regulations) Dimensions including SM58 cartridge 254 mm x 51 mm dia. (10 x 2 in.) Weight 290 grams (10.2 oz.) without batteries Housing Molded PC/ABS handle and battery cup Power Requirements 2 “AA” size alkaline or rechargeable batteries Battery Life >8 hours (alkaline) Thu, 28 Apr 2011 11:18:23 GMT http://www.rwsprosound.co.uk/p/shure-pgx24uksm58-handheld-radio-mic-system.html http://www.rwsprosound.co.uk/p/shure-pgx24ukpg58-handheld-radio-mic-system.html The Shure PGX PG58 system offers superior wireless technology, automatic set-up features and the PG58 microphone. The system comprises of a PGX2 Handheld transmitter with a PG58 microphone head and a PGX4 DiversityWireless “diversity” receivers feature two separate antennas for consistent signal reception. This wireless system is ideally suited for vocals and can be used by bands and presenters. System technical specifications Compatible systems per frequencyThis is how many times a sound or radio wave oscillates in one second.  band (up to): 8 Selectable frequencies: 90 Auto Setup Features: Scan/Sync Audio Reference Companding: Yes Included Antennas: Attached 1/4-wave Antenna Options: No Receiver Network Ability: No PC Control: No Rack Hardware: Optional (URT) Case: System Case Transmitter Display: Multi-color LED Receiver Display: Multi-color LED Battery, Endurance: 2AA, >8 h Environment: Small to medium stages Further Technical Specs PGX4 Receiver  Dimensions 40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.) Weight 327 g (11.5 oz.) Housing ABS Audio Output Level (ref. +/– 33 kHz deviation with 1 kHz tone) XLR connector (into 600 Ω load): –19 dBV 1/4 inch connector (into 3000 Ω load): –5 dBV Output Impedance XLR connector: 200 Ω 1/4 inch connector: 1kΩ XLR output Impedance balanced Pin 1: Ground (cable shield) Pin 2: Audio Pin 3: No Audio Sensitivity –105 dBm for 12 dB SINAD, typical Image Rejection >70 dB, typical Power Requirements 12–18 Vdc at 150 mA, supplied by external power supply    PGX2 Handheld Transmitter  Audio Input Level +2 dBV maximum at –10dB position –8 dBV maximum at 0dB position Gain Adjustment Range 10dB RF Transmitter Output 30 mW maximum (dependent on applicable country regulations) Dimensions including SM58 cartridge 254 mm x 51 mm dia. (10 x 2 in.) Weight 290 grams (10.2 oz.) without batteries Housing Molded PC/ABS handle and battery cup Power Requirements 2 “AA” size alkaline or rechargeable batteries Battery Life >8 hours (alkaline) Thu, 28 Apr 2011 11:16:15 GMT http://www.rwsprosound.co.uk/p/shure-pgx24ukpg58-handheld-radio-mic-system.html http://www.rwsprosound.co.uk/p/shure-pg1288ukpg30-dual-handheld-and-headset-radio-mic-system.html The Shure Performance Gear PG30/PG58 dual wireless system is the perfect introduction to our wireless portfolio. This package comprises a PG1Bodypack transmitter, a PG30 headworn mic, a PG2 handheld transmitter and a PG88 diversityWireless “diversity” receivers feature two separate antennas for consistent signal reception.Read moreGo to the glossary receiver. System technical specifications Compatible systems per frequencyThis is how many times a sound or radio wave oscillates in one second. band (up to): 4 Selectable frequencies: 10 Auto Setup Features: No Audio Reference Companding: No Included Antennas: Internal 1/4-wave Antenna Options: No Receiver Network Ability: No PC Control: No Rack Hardware: Optional (URT) Case: Optional System Case Transmitter Display: Multi-color LED Receiver Display: Multi-color LED Battery, Endurance: 9V, >8 h Environment: Small to medium stages Further Technical Specs PG88 Dual Receiver Output Impedance XLR connector: 200 Ω 1/4 inch connector: 1kΩ Audio Output Level Ref. +/– 33 kHz deviation with 1 kHz tone XLR connector (into 100K Ω load): –19 dBV, typical 1/4 inch connector (into 100K Ω load): –5 dBV, typical Sensitivity –105 dBm for 12 dB SINAD, typical Image Rejection >50 dB, typical Dimensions 188 mm L x 103 mm W x 40 mm D (7.4 in. x 4.0 in. x 1.5 in.) Dimensions - PG88 388 mm L x 116 mm W x 40 mm D (15.3 in. x 4 in. x 1.5 in.) Weight 241 grams (8.5 oz) Weight - PG88 429 grams (15.1 oz) Housing Molded ABS Power Requirements 12–18 Vdc at 160 mA (PG4), 320mA (PG88), supplied by external power supply PG1 Bodypack Transmitter Audio Input Level -10 dBV maximum at "mic" gain position +10 dBV maximum at 0dB gain position +20 dBV maximum at -10dB gain position Gain Adjustment Range 30 dB Input Impedance 1mΩ RF Transmitter Output 10 mW typical (dependent on applicable country regulations) Dimensions 110 mm H x 64 mm W x 21 mm D (4.3 x 2.5 x 0.8 in.) Weight 75 grams (2.6 oz.) without battery Housing Molded ABS Power Requirements One 9V alkaline or rechargeable battery Battery Life Up to 8 hours (alkaline)  PG2 Handheld Transmitter Audio Input Level +2 dBV maximum at -10dB position -8 dBV maximum at 0dB position Gain Adjustment Range 10dB RF Transmitter Output 10 mW typical (dependent on applicable country regulations) Dimensions 223.52 mm L x 53.34 mm Dia. (8.8 in. x 2.10 in.) Weight 218 grams (7.7 oz.) without battery Housing Molded ABS handle and battery cup Power Requirements One 9V alkaline or rechargeable battery Battery Life Up to 8 hours (alkaline) Thu, 28 Apr 2011 11:08:18 GMT http://www.rwsprosound.co.uk/p/shure-pg1288ukpg30-dual-handheld-and-headset-radio-mic-system.html http://www.rwsprosound.co.uk/p/shure-pg1288ukpg185-dual-handheld-and-lapel-radio-mic-system.html The Shure Performance Gear PG185/PG58 dual wireless system is the perfect introduction to our wireless portfolio. This package comprises a PG1 Bodypack transmitter, a PG185 lavalier mic, a PG2 handheld transmitter and a PG88 diversityWireless “diversity” receivers feature two separate antennas for consistent signal reception. System technical specifications Compatible systems per frequencyThis is how many times a sound or radio wave oscillates in one second. band (up to): 4 Selectable frequencies: 10 Auto Setup Features: No Audio Reference Companding: No Included Antennas: Internal 1/4-wave Antenna Options: No Receiver Network Ability: No PC Control: No Rack Hardware: Optional (URT) Case: Optional System Case Transmitter Display: Multi-color LED Receiver Display: Multi-color LED Battery, Endurance: 9V, >8 h Environment: Small to medium stages Further Technical Specs PG88 Dual Receiver Output Impedance XLR connector: 200 Ω 1/4 inch connector: 1kΩ Audio Output Level Ref. +/– 33 kHz deviation with 1 kHz tone XLR connector (into 100K Ω load): –19 dBV, typical 1/4 inch connector (into 100K Ω load): –5 dBV, typical Sensitivity –105 dBm for 12 dB SINAD, typical Image Rejection >50 dB, typical Dimensions 188 mm L x 103 mm W x 40 mm D (7.4 in. x 4.0 in. x 1.5 in.) Dimensions - PG88 388 mm L x 116 mm W x 40 mm D (15.3 in. x 4 in. x 1.5 in.) Weight 241 grams (8.5 oz) Weight - PG88 429 grams (15.1 oz) Housing Molded ABS Power Requirements 12–18 Vdc at 160 mA (PG4), 320mA (PG88), supplied by external power supply PG1 Bodypack Transmitter Audio Input Level -10 dBV maximum at "mic" gain position +10 dBV maximum at 0dB gain position +20 dBV maximum at -10dB gain position Gain Adjustment Range 30 dB Input Impedance 1mΩ RF Transmitter Output 10 mW typical (dependent on applicable country regulations) Dimensions 110 mm H x 64 mm W x 21 mm D (4.3 x 2.5 x 0.8 in.) Weight 75 grams (2.6 oz.) without battery Housing Molded ABS Power Requirements One 9V alkaline or rechargeable battery Battery Life Up to 8 hours (alkaline) Thu, 28 Apr 2011 11:04:51 GMT http://www.rwsprosound.co.uk/p/shure-pg1288ukpg185-dual-handheld-and-lapel-radio-mic-system.html http://www.rwsprosound.co.uk/p/shure-pg288ukpg58-dual-handheld-radio-mic-system.html The Shure Performance Gear Dual PG58 wireless system is the perfect introduction to our wireless portfolio. This package comprises two PG2 handheld transmitters with PG58 microphone heads and a PG88 diversityWireless “diversity” receivers feature two separate antennas for consistent signal reception.Read moreGo to the glossary receiver.   System technical specifications Compatible systems per frequencyThis is how many times a sound or radio wave oscillates in one second. band (up to): 4 Selectable frequencies: 10 Auto Setup Features: No Audio Reference Companding: No Included Antennas: Internal 1/4-wave Antenna Options: No Receiver Network Ability: No PC Control: No Rack Hardware: Optional (URT) Case: Optional System Case Transmitter Display: Multi-color LED Receiver Display: Multi-color LED Battery, Endurance: 9V, >8 h Environment: Small to medium stages Further Technical Specs PG88 Dual Receiver Output Impedance XLR connector: 200 Ω 1/4 inch connector: 1kΩ Audio Output Level Ref. +/– 33 kHz deviation with 1 kHz tone XLR connector (into 100K Ω load): –19 dBV, typical 1/4 inch connector (into 100K Ω load): –5 dBV, typical Sensitivity –105 dBm for 12 dB SINAD, typical Image Rejection >50 dB, typical Dimensions 188 mm L x 103 mm W x 40 mm D (7.4 in. x 4.0 in. x 1.5 in.) Dimensions - PG88 388 mm L x 116 mm W x 40 mm D (15.3 in. x 4 in. x 1.5 in.) Weight 241 grams (8.5 oz) Weight - PG88 429 grams (15.1 oz) Housing Molded ABS Power Requirements 12–18 Vdc at 160 mA (PG4), 320mA (PG88), supplied by external power supply  PG2 Handheld Transmitter Audio Input Level +2 dBV maximum at -10dB position -8 dBV maximum at 0dB position Gain Adjustment Range 10dB RF Transmitter Output 10 mW typical (dependent on applicable country regulations) Dimensions 223.52 mm L x 53.34 mm Dia. (8.8 in. x 2.10 in.) Weight 218 grams (7.7 oz.) without battery Housing Molded ABS handle and battery cup Power Requirements One 9V alkaline or rechargeable battery Battery Life Up to 8 hours (alkaline) Thu, 28 Apr 2011 11:01:13 GMT http://www.rwsprosound.co.uk/p/shure-pg288ukpg58-dual-handheld-radio-mic-system.html http://www.rwsprosound.co.uk/p/shure-pg24ukpg58-handheld-radio-mic-system.html The Shure Performance Gear PG58 wireless system is the perfect introduction to our wireless portfolio. Combining superior sound quality and stage proven endurance with advanced features like Internal Antenna DiversityWireless “diversity” receivers feature two separate antennas for consistent signal reception.Read moreGo to the glossary and frequencyThis is how many times a sound or radio wave oscillates in one second.Read moreGo to the glossary selectability. This package comprises a PG2 handheld transmitter with an PG58 microphone head and PG4 diversityWireless “diversity” receivers feature two separate antennas for consistent signal reception.Read moreGo to the glossary receiver. System technical specifications Compatible systems per frequencyThis is how many times a sound or radio wave oscillates in one second. band (up to): 4 Selectable frequencies: 10 Auto Setup Features: No Audio Reference Companding: No Included Antennas: Internal 1/4-wave Antenna Options: No Receiver Network Ability: No PC Control: No Rack Hardware: Optional (URT) Case: Optional System Case Transmitter Display: Multi-color LED Receiver Display: Multi-color LED Battery, Endurance: 9V, >8 h Environment: Small to medium stages Further Technical Specs PG4 Receiver Output Impedance XLR connector: 200 Ω 1/4 inch connector: 1kΩ Audio Output Level Ref. +/– 33 kHz deviation with 1 kHz tone XLR connector (into 100K Ω load): –19 dBV, typical 1/4 inch connector (into 100K Ω load): –5 dBV, typical Sensitivity –105 dBm for 12 dB SINAD, typical Image Rejection >50 dB, typical Dimensions 188 mm L x 103 mm W x 40 mm D (7.4 in. x 4.0 in. x 1.5 in.) Dimensions - PG88 388 mm L x 116 mm W x 40 mm D (15.3 in. x 4 in. x 1.5 in.) Weight 241 grams (8.5 oz) Weight - PG88 429 grams (15.1 oz) Housing Molded ABS Power Requirements 12–18 Vdc at 160 mA (PG4), 320mA (PG88), supplied by external power supply PG2 Handheld Transmitter Audio Input Level +2 dBV maximum at -10dB position -8 dBV maximum at 0dB position Gain Adjustment Range 10dB RF Transmitter Output 10 mW typical (dependent on applicable country regulations) Dimensions 223.52 mm L x 53.34 mm Dia. (8.8 in. x 2.10 in.) Weight 218 grams (7.7 oz.) without battery Housing Molded ABS handle and battery cup Power Requirements One 9V alkaline or rechargeable battery Battery Life Up to 8 hours (alkaline) Thu, 28 Apr 2011 10:56:52 GMT http://www.rwsprosound.co.uk/p/shure-pg24ukpg58-handheld-radio-mic-system.html http://www.rwsprosound.co.uk/p/mc2-e100-professional-power-amplifier.html The E100 is the newest addition to the E Series with 4 channels of massive amplification. Based on new MC2 proprietary Class-D technology, it has been designed to meet the demands for higher power with increased efficiency whilst still maintaining the renowned MC2 sonic qualities and unsurpassed reliability. Running cool even in the most difficult conditions, the E100 can deliver up to 2800w into 4 ohms and a massive 3700w into 2 ohms, with outstanding distortion figures. The sophisticated MC2 power control circuits keep the amplifier operating within safe limits and allow it to be operated on standard mains supplies. Together with its switchmode power supply and huge power reservoirs, the E90 is capable of delivering large peaks of energy, producing effortless bass delivery without any perceivable ‘sag’. Thu, 28 Apr 2011 10:24:12 GMT http://www.rwsprosound.co.uk/p/mc2-e100-professional-power-amplifier.html http://www.rwsprosound.co.uk/p/sennheiser-ew512-g3-omni-lapel-radio-mic-system.html The Sennheiser EW512 G3 system comes complete with the famous MKE 2-ew lapel microphone. The MKE 2-ew is one of Sennheiser’s most successful and trusted clip-on condenser microphones. This set relays its high-quality signal via a compact bodypack transmitter to the flagship evolution EM 500 true diversity receiver. Sync up the bodypack to the receiver with a simple press of the sync button. Sennheiser’s technical prowess in wireless technology allows you to focus on delivering your most successful presentation ever without worrying about your wireless. Features Sturdy metal housing (transmitter and receiver 42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception Enhanced frequency bank system with up to 32 compatible frequencies Ethernet port for connecting to the Wireless Systems Manager (WSM) software for control via computer - this delivers a good overview of monitoring and professional data management for multi-channel systems High-quality true diversity reception Pilot tone squelch for eliminating RF interference when transmitter is turned off Automatic frequency scan feature searches for available frequencies Enhanced AF frequency range Increased range for audio sensitivity Wireless synchronization of transmitter parameter from receiver User-friendly menu operation with more control options Illuminated graphic display, receiver also shows transmitter settings Auto-Lock function avoids accidental changing of settings HDX compander for crystal-clear sound Transmitter feature battery indicatation in 4 steps, also shown on receiver display Programmable Mute function Integrated Equalizer and Soundcheck mode Contacts for recharging BA 2015 accupack directly in the transmitter Wide range of accessories adapts the system to any requirement Delivery Includes 1 EM 500 G3 rack-mount receiver 1 SK 500 G3 bodypack transmitter 1 MKE 2-ew clip-on microphone (omni-directional) 1 GA 3 rack mount 1 NT 2 power supply unit 2 antennas 2 AA batteries Operating instructions Thu, 28 Apr 2011 10:13:16 GMT http://www.rwsprosound.co.uk/p/sennheiser-ew512-g3-omni-lapel-radio-mic-system.html http://www.rwsprosound.co.uk/p/sennheiser-ew352-g3-headworn-radio-mic-system.html The Sennheiser EW352 G3 gives you absolute freedom of movement for a more animated and impressive performance. High quality condenser technology provides clear, brilliant sound. All rack-mountable G3 300 series receivers are equipped with an Ethernet port. This port means you can monitor and remotely control the system from a PC with Sennheiser’s “Wireless Systems Manager” software. Features Sturdy metal housing (transmitter and receiver 42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception Enhanced frequency bank system with up to 24 compatible frequencies Ethernet port for connecting to the Wireless Systems Manager (WSM) software for control via computer - this delivers a good overview of monitoring and professional data management for multi-channel systems High-quality true diversity reception Pilot tone squelch for eliminating RF interference when transmitter is turned off Automatic frequency scan feature searches for available frequencies Enhanced AF frequency range Increased range for audio sensitivity Wireless synchronization of transmitter parameter from receiver User-friendly menu operation with more control options Illuminated graphic display, receiver also shows transmitter settings Auto-Lock function avoids accidental changing of settings HDX compander for crystal-clear sound Transmitter feature battery indicatation in 4 steps, also shown on receiver display Programmable Mute function Integrated Equalizer and Soundcheck mode Contacts for recharging BA 2015 accupack directly in the transmitter Wide range of accessories adapts the system to any requirement Delivery Includes 1 EM 300 G3 rack-mount receiver 1 SK 300 G3 bodypack transmitter 1 ME 3-ew headset microphone (cardioid) 1 GA 3 rack mount 1 NT 2 power supply unit 2 antennas 2 AA batteries Operating instructions Thu, 28 Apr 2011 10:03:55 GMT http://www.rwsprosound.co.uk/p/sennheiser-ew352-g3-headworn-radio-mic-system.html http://www.rwsprosound.co.uk/p/sennheiser-ew152-g3-headworn-radio-mic-system.html The Sennheiser EW152 G3 system allows you to express yourself hands free: cover the whole stage and focus on your performance rather than on holding your microphone. The included cardioid condenser headset microphone is easy to wear, has great pop protection and produces powerful sound. Also included in this system is a stage-tested true diversity receiver and a bodypack transmitter with charging contacts for the optional BA2015 rechargeable battery. Features Sturdy metal housing (transmitter and receiver 42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception Enhanced frequency bank system with up to 12 compatible frequencies High-quality true diversity reception Pilot tone squelch for eliminating RF interference when transmitter is turned off Automatic frequency scan feature searches for available frequencies Enhanced AF frequency range Increased range for audio sensitivity Wireless synchronization of transmitters via infrared interface User-friendly menu operation with more control options Illuminated graphic display (transmitter and receiver) Auto-Lock function avoids accidental changing of settings HDX compander for crystal-clear sound Transmitter feature battery indicatation in 4 steps, also shown on receiver display Programmable Mute function Integrated Equalizer and Soundcheck mode Contacts for recharging BA 2015 accupack directly in the transmitter Wide range of accessories adapts the system to any requirement Delivery Includes 1 EM 100 G3 rack-mount receiver 1 SK 100 G3 bodypack transmitter 1 ME 3-ew headset (cardioid) 1 NT 2 power supply unit 2 antennas 2 stacking elements 2 AA batteries Operating instructions Thu, 28 Apr 2011 10:00:12 GMT http://www.rwsprosound.co.uk/p/sennheiser-ew152-g3-headworn-radio-mic-system.html http://www.rwsprosound.co.uk/p/sennheiser-ew312-g3-omni-lapel-radio-mic-system.html The Sennheiser EW312 G3 system has the capability like all 300 systems of communicating in harmony: when the settings on the receiver are changed, the components adjust to each other automatically with one push of the front panel sync button. The bodypack transmitter is equipped with charging contacts for the optional BA2015 rechargeable battery. The inconspicuous omni-directional clip-on microphone is optimized for best reproducing the sound of the human voice and provides supreme speech intelligibility. Features Sturdy metal housing (transmitter and receiver 42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception Enhanced frequency bank system with up to 24 compatible frequencies Ethernet port for connecting to the Wireless Systems Manager (WSM) software for control via computer - this delivers a good overview of monitoring and professional data management for multi-channel systems High-quality true diversity reception Pilot tone squelch for eliminating RF interference when transmitter is turned off Automatic frequency scan feature searches for available frequencies Enhanced AF frequency range Increased range for audio sensitivity Wireless synchronization of transmitter parameter from receiver User-friendly menu operation with more control options Illuminated graphic display, receiver also shows transmitter settings Auto-Lock function avoids accidental changing of settings HDX compander for crystal-clear sound Transmitter feature battery indicatation in 4 steps, also shown on receiver display Programmable Mute function Integrated Equalizer and Soundcheck mode Contacts for recharging BA 2015 accupack directly in the transmitter Wide range of accessories adapts the system to any requirement Delivery Includes 1 EM 300 G3 rack-mount receiver 1 SK 300 G3 bodypack transmitter 1 ME 2 clip-on microphone (omni-directional) 1 GA 3 rack mount 1 NT 2 power supply unit 2 antennas 2 AA batteries Operating instructions Thu, 28 Apr 2011 09:57:02 GMT http://www.rwsprosound.co.uk/p/sennheiser-ew312-g3-omni-lapel-radio-mic-system.html http://www.rwsprosound.co.uk/p/sennheiser-ew322-g3-cardioid-lapel-radio-mic-system.html The Sennheiser EW322 G3 is small but mighty: the clip-on microphone in this professional set is nearly invisible. The included cardioid pattern microphone has both great resistance to feedback and clear voice reproduction. The true diversity receiver means you get the highest degree of signal reliability at all times. Sync up the bodypack with the receiver with a single touch of a button. Especially convenient: you can connect an external mute button (option) to the additional 2.5 mm jack socket on the bodypack transmitter. Features Sturdy metal housing (transmitter and receiver 42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception Enhanced frequency bank system with up to 24 compatible frequencies Ethernet port for connecting to the Wireless Systems Manager (WSM) software for control via computer - this delivers a good overview of monitoring and professional data management for multi-channel systems High-quality true diversity reception Pilot tone squelch for eliminating RF interference when transmitter is turned off Automatic frequency scan feature searches for available frequencies Enhanced AF frequency range Increased range for audio sensitivity Wireless synchronization of transmitter parameter from receiver User-friendly menu operation with more control options Illuminated graphic display, receiver also shows transmitter settings Auto-Lock function avoids accidental changing of settings HDX compander for crystal-clear sound Transmitter feature battery indicatation in 4 steps, also shown on receiver display Programmable Mute function Integrated Equalizer and Soundcheck mode Contacts for recharging BA 2015 accupack directly in the transmitter Wide range of accessories adapts the system to any requirement Delivery Includes 1 EM 300 G3 rack-mount receiver 1 SK 300 G3 bodypack transmitter 1 ME 4 clip-on microphone (cardioid) 1 GA 3 rack mount 1 NT 2 power supply unit 2 antennas 2 AA batteries Operating instructions Thu, 28 Apr 2011 09:53:08 GMT http://www.rwsprosound.co.uk/p/sennheiser-ew322-g3-cardioid-lapel-radio-mic-system.html http://www.rwsprosound.co.uk/p/xta-dc1048.html The XTA DC1048 offers full matrix mixing and a pallette of EQ functions to satisfy even the most demanding application, the DC1048 doesn’t compromise your processing, whilst offering a range of installation-friendly features. 24-bit high end converters coupled with a 96k sample rate, ensure a bandwidth in excess of 30kHz and a dynamic range of over 112dB. XTA's world class limiters, offer unrivalled transparency, give peace of mind when configuring a system to “set and forget”. Systems that are often driven hard "into the red" and with heavy limiting, more often than not, sound harsh and tiring. Our limitiers are renowned for their smooth controlled behavoiur, even when working hard. Quick access keys make setting up the remote facilities a breeze, with simple easy to remember menus. Preset recalls may also be actioned from the front panel. The real time clock and calendar in each unit allows for the set-up of fully automated preset recalls, so your system can seamlessly adapt in the background with no need for user intervention. Display and guide LEDs fade up when the unit is locally accessed, with the display fading up independently when remotely accessed. With a GPIO interface built in, along with the USB easy access front panel connector, and RS485 networking, it’s easy to get your system configured and then left secure with only remote access via the touch panels (or any other system you choose). As with all xta products, excellent sound quality is assured through the heritage of the 4 Series processing platform, and the use of high resolution, high sample rate audio converters. Remote touch sensitive wall panels allow for quick recall of up to four presets (with the facility to program an offset for different banks). These panels can be parallelled up around a venue so any one will trigger a system-wide recall, with messages relaying via RS485. An additional control line allows for an override memory to work with emergency evacuation systems.     Wed, 27 Apr 2011 11:00:09 GMT http://www.rwsprosound.co.uk/p/xta-dc1048.html http://www.rwsprosound.co.uk/p/xta-dp548.html ll the original features and sound quality of the 4 Series are preserved and expanded upon using a newer DSP platform, and with some never before seen ground breaking features in AudioCore, it all makes for a new dynamic combination Each input has a 28 band graphic EQ that can be configured to model either our own GQ600, or older inductor based designs such as the DN27 There are an additional 8 bands of "traditional" parametric EQ on each input. All parametric sections can be reconfigured to many alternate filter behaviours, including the familiar high and low shelves and notch filters, but along with bandpass, elliptic and variable 'Q' shapes, and phase adjustment, in 2 degree steps. On top of all this EQ that you might be used to comes the incredibly powerful dynamic EQ. Three bands of SiDD's dynamic EQ are available on each input, with all four modes of operation supported (so, cut/boost either above or below the threshold). Each band will cover the full 20-20k range and has controls for envelope (attack/release) as well as setting the maximum allowable amount of gain adjustment and choosing the "strength" of the effect (the ratio in dynamics terms). Dynamic EQ may be stored in its own memories, as can graphic EQ settings, all other input settings or all output settings, and every combination of these if necessary! Considering how daunting this could be, and it is all still editable via the front panel, AudioCore opens up the dynamic EQ ediitng in an incredibly intuitive manner. Routing inputs to outputs is as flexible as ever with any input or combination of inputs being switchable to any output, and there are various useful templates to get you started (along with default crossover points to help). The DP548 also supports a full matrix mixing mode where inputs may be mixed in any ratio to any outputs with four "sends" being available on each output channel instead of just switching on/off Looking at output sections, the requisite crossover filters offer slopes from 6dB/Octave up to 48dB/Octave. Nine more bands of parametric EQ follow and then we have a a choice of dynamics useful for protection or for creative use. Before the limiter sections there is now a fully featured compressor with variable knee to turn it from a safe corrective tool with hard knee to a gentler (but still with a high ratio if required) effect that only makes its presence felt gradually as the threshold is approached and exceeded. Each output also features a combination of limiters - a limiter designed to protect individual drivers from over-heating, and an additional look-ahead "D-Max" limiter for added safety and to prevent driver over-excursion. Add to this sub-millimetre accuracy when introducing time alignment with completely flexible ganging of all channels, and it can be seen that the DP548 will fit the bill in any situation.   Wed, 27 Apr 2011 10:56:33 GMT http://www.rwsprosound.co.uk/p/xta-dp548.html